1. after DM1.5, remove the device from the fixture 2. leave the SD card in the device 3. insert a charged battery 4. press and hold AUX 5. press and hold POWER 6. within <5 seconds, the boot menu should appear. If not, repeat from step 3. If it fails again, go to step 10. 7. verify that the boot menu should shows "*** BOOT MENU (NOR) ***". Pay attention to the "NOR" ! If the title is incorrect, repeat from step 3. If it fails again, go to step 10. 8. PASS. 10. FAIL. keep the device for further examination. 11. remove the SD card and place it in a card reader (on a Linux PC) 12. record the number of the SD card (if the SD cards are not yet numbered, do so now) 13. mount the card, e.g., on /mnt/mmc 14. run find /mnt/mmc -ls 15. mail the card number and the output from the above command to gta02@lists.internal.openmoko.org