#daemon configuration
telnet_port 4444
gdb_port 3333

#interface
interface ft2232
jtag_speed 0

#ft2232_vid_pid 0x0403 0xcff8
ft2232_vid_pid 0x1457 0x5118
ft2232_layout "jtagkey"

#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst #srst_pulls_trst

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe

#target configuration
daemon_startup attach
#target <type> <startup mode>
target arm920t little reset_run 0 arm920t
working_area 0 0x200000 0x4000 backup
run_and_halt_time 0 5000

#flash configuration (K9D1208V0M: 512Mbit, x8, 3.3V, Mode: Normal, 1st gen)
#NOR flash configuration (SST39VF400A 4Mbit, x16, 3.3V, 128sect, 4k/sect, 8 blocks (64kByte per block)
# flash bank cfg addr length chip_width bus_width target
#flash bank cfi 0x00000000 0x80000 2 2 0


# SAM7
#jtag_device 4 0x1 0xf 0xe
#target arm7tdmi little reset_halt 0 arm7tdmi
#daemon_startup reset
#working_area 0 0x40000000 0x4000 nobackup
#flash bank at91sam7 0 0 0 0 0