#ifndef _LINUX_FS_H
#define _LINUX_FS_H

/*
 * This file has definitions for some important file table
 * structures etc.
 */

#include <linux/limits.h>
#include <linux/ioctl.h>

/*
 * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
 * the file limit at runtime and only root can increase the per-process
 * nr_file rlimit, so it's safe to set up a ridiculously high absolute
 * upper limit on files-per-process.
 *
 * Some programs (notably those using select()) may have to be 
 * recompiled to take full advantage of the new limits..  
 */

/* Fixed constants first: */
#undef NR_OPEN
#define NR_OPEN (1024*1024)	/* Absolute upper limit on fd num */
#define INR_OPEN 1024		/* Initial setting for nfile rlimits */

#define BLOCK_SIZE_BITS 10
#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)

#define SEEK_SET	0	/* seek relative to beginning of file */
#define SEEK_CUR	1	/* seek relative to current file position */
#define SEEK_END	2	/* seek relative to end of file */

/* And dynamically-tunable limits and defaults: */
struct files_stat_struct {
	int nr_files;		/* read only */
	int nr_free_files;	/* read only */
	int max_files;		/* tunable */
};
extern struct files_stat_struct files_stat;
extern int get_max_files(void);

struct inodes_stat_t {
	int nr_inodes;
	int nr_unused;
	int dummy[5];
};
extern struct inodes_stat_t inodes_stat;

extern int leases_enable, lease_break_time;

#ifdef CONFIG_DNOTIFY
extern int dir_notify_enable;
#endif

#define NR_FILE  8192	/* this can well be larger on a larger system */

#define MAY_EXEC 1
#define MAY_WRITE 2
#define MAY_READ 4
#define MAY_APPEND 8

#define FMODE_READ 1
#define FMODE_WRITE 2

/* Internal kernel extensions */
#define FMODE_LSEEK	4
#define FMODE_PREAD	8
#define FMODE_PWRITE	FMODE_PREAD	/* These go hand in hand */

/* File is being opened for execution. Primary users of this flag are
   distributed filesystems that can use it to achieve correct ETXTBUSY
   behavior for cross-node execution/opening_for_writing of files */
#define FMODE_EXEC	16

#define RW_MASK		1
#define RWA_MASK	2
#define READ 0
#define WRITE 1
#define READA 2		/* read-ahead  - don't block if no resources */
#define SWRITE 3	/* for ll_rw_block() - wait for buffer lock */
#define SPECIAL 4	/* For non-blockdevice requests in request queue */
#define READ_SYNC	(READ | (1 << BIO_RW_SYNC))
#define WRITE_SYNC	(WRITE | (1 << BIO_RW_SYNC))
#define WRITE_BARRIER	((1 << BIO_RW) | (1 << BIO_RW_BARRIER))

#define SEL_IN		1
#define SEL_OUT		2
#define SEL_EX		4

/* public flags for file_system_type */
#define FS_REQUIRES_DEV 1 
#define FS_BINARY_MOUNTDATA 2
#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
#define FS_ODD_RENAME	32768	/* Temporary stuff; will go away as soon
				  * as nfs_rename() will be cleaned up
				  */
/*
 * These are the fs-independent mount-flags: up to 32 flags are supported
 */
#define MS_RDONLY	 1	/* Mount read-only */
#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
#define MS_NODEV	 4	/* Disallow access to device special files */
#define MS_NOEXEC	 8	/* Disallow program execution */
#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
#define MS_NOATIME	1024	/* Do not update access times. */
#define MS_NODIRATIME	2048	/* Do not update directory access times */
#define MS_BIND		4096
#define MS_MOVE		8192
#define MS_REC		16384
#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
				   MS_VERBOSE is deprecated. */
#define MS_SILENT	32768
#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
#define MS_PRIVATE	(1<<18)	/* change to private */
#define MS_SLAVE	(1<<19)	/* change to slave */
#define MS_SHARED	(1<<20)	/* change to shared */
#define MS_ACTIVE	(1<<30)
#define MS_NOUSER	(1<<31)

/*
 * Superblock flags that can be altered by MS_REMOUNT
 */
#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK)

/*
 * Old magic mount flag and mask
 */
#define MS_MGC_VAL 0xC0ED0000
#define MS_MGC_MSK 0xffff0000

/* Inode flags - they have nothing to superblock flags now */

#define S_SYNC		1	/* Writes are synced at once */
#define S_NOATIME	2	/* Do not update access times */
#define S_APPEND	4	/* Append-only file */
#define S_IMMUTABLE	8	/* Immutable file */
#define S_DEAD		16	/* removed, but still open directory */
#define S_NOQUOTA	32	/* Inode is not counted to quota */
#define S_DIRSYNC	64	/* Directory modifications are synchronous */
#define S_NOCMTIME	128	/* Do not update file c/mtime */
#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
#define S_PRIVATE	512	/* Inode is fs-internal */

/*
 * Note that nosuid etc flags are inode-specific: setting some file-system
 * flags just means all the inodes inherit those flags by default. It might be
 * possible to override it selectively if you really wanted to with some
 * ioctl() that is not currently implemented.
 *
 * Exception: MS_RDONLY is always applied to the entire file system.
 *
 * Unfortunately, it is possible to change a filesystems flags with it mounted
 * with files in use.  This means that all of the inodes will not have their
 * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
 * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
 */
#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))

#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
					((inode)->i_flags & S_SYNC))
#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)

#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)

#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)

/* the read-only stuff doesn't really belong here, but any other place is
   probably as bad and I don't want to create yet another include file. */

#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
#if 0
#define BLKPG      _IO(0x12,105)/* See blkpg.h */

/* Some people are morons.  Do not use sizeof! */

#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
/* This was here just to show that the number is taken -
   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
#endif
/* A jump here: 108-111 have been used for various private purposes. */
#define BLKBSZGET  _IOR(0x12,112,size_t)
#define BLKBSZSET  _IOW(0x12,113,size_t)
#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
#define BLKTRACESTART _IO(0x12,116)
#define BLKTRACESTOP _IO(0x12,117)
#define BLKTRACETEARDOWN _IO(0x12,118)

#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
#define FIBMAP	   _IO(0x00,1)	/* bmap access */
#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */

#define SYNC_FILE_RANGE_WAIT_BEFORE	1
#define SYNC_FILE_RANGE_WRITE		2
#define SYNC_FILE_RANGE_WAIT_AFTER	4

#endif /* _LINUX_FS_H */
