SD-capacitor fix for GPS without soldering. Please note this isn't verified nor recommended by OM, though there are positive reports on similar "reworks"

Anzahl der Bilder: 16
Erstellt am: So 12. Oktober 2008

thumbs/19_Tools_and_Materials.jpg.jpg
19_Tools_and_Materials.jpg
(1602 KB)
 thumbs/22_thin_doublesided_sticky.jpg.jpg
22_thin_doublesided_sticky.jpg
(1436 KB)
 thumbs/26_8mm.jpg.jpg
26_8mm.jpg
(1630 KB)
thumbs/27_8mm_or_less.jpg.jpg
27_8mm_or_less.jpg
(1105 KB)
 thumbs/28_arbitrary_tin-foil.jpg.jpg
28_arbitrary_tin-foil.jpg
(1119 KB)
 thumbs/30_cut_8x8.jpg.jpg
30_cut_8x8.jpg
(1149 KB)
thumbs/31_one_side_ds-sticky.jpg.jpg
31_one_side_ds-sticky.jpg
(1453 KB)
 thumbs/32_cover_with_scotch_to_isolate.jpg.jpg
32_cover_with_scotch_to_isolate.jpg
(1420 KB)
 thumbs/33_note_plastic-only_border_to_enclose.jpg.jpg
33_note_plastic-only_border_to_enclose.jpg
(668 KB)
thumbs/34_fits.jpg.jpg
34_fits.jpg
(765 KB)
 thumbs/35_attach_placement_tool.jpg.jpg
35_attach_placement_tool.jpg
(700 KB)
 thumbs/36_peel_off_paper_from_ds.jpg.jpg
36_peel_off_paper_from_ds.jpg
(630 KB)
thumbs/38_place_adjust_and_fix__inline_with_bottom_of_springs.jpg.jpg
38_place_adjust_and_fix__inline_with_bottom_of_springs.jpg
(824 KB)
 thumbs/39_hold_while_removing_tool-sticky.jpg.jpg
39_hold_while_removing_tool-sticky.jpg
(886 KB)
 thumbs/41_fits.jpg.jpg
41_fits.jpg
(935 KB)
thumbs/42_had_to_bend_clips_a_little_to_make_it_lock.jpg.jpg
42_had_to_bend_clips_a_little_to_make_it_lock.jpg
(971 KB)